Agri-Fab 45-02141 Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Agri-Fab 45-02141. Agri-Fab 45-02141 12 pages. Broadcast spreader 100 (push)
Également pour Agri-Fab 45-02141 : Manuel du propriétaire (13 pages)
Imprimer la page17. Assemble the flow control arm to the flow control
mounting bracket using one 1/4" x 5/8" hex bolt and
one 1/4" lock nut. Do not over tighten. The flow
control arm must pivot freely. See figure 10.
18. Hook one end of extension spring through small hole
near bend in flow control rod and the other end through
hole in flow control mounting bracket. See figure 10.
FLOW CONTROL ARM
FLOW CONTROL
MOUNTING BRACKET
FLOW
CONTROL
ROD
EXTENSION
SPRING
1/4" HEX LOCK NUT
FIGURE 10
19. Place a 5/16" flat washer over the end of flow
control rod, and insert end of rod through slot in
flow control mount bracket and through the hole
in flow control link. Secure with a 3/32" x 3/4"
cotter pin. See figure 11.
FLOW
CONTROL
ROD
EXTENSION
SPRING
5/16" FLAT
WASHER
FLOW CONTROL
MOUNTING BRACKET
FIGURE 11
FLOW
CONTROL
LINK
1/4" x 5/8"
HEX BOLT
FLOW
CONTROL
LINK
3/32"
COTTER
PIN
6
20. Hook free end of flow control rod through hole in slide
gate bracket located near bottom of hopper. See figure
12.
HOPPER
FIGURE 12
21. Assemble flow control mounting bracket and the handle
tube (short) to the handle tube (long) using two 1/4" x
1-1/2" hex bolts, two 5/16" flat washers and two 1/4"
lock nuts. See figure 13. DO NOT TIGHTEN AT THIS
TIME.
22. Place handle grip on each handle tube. See figure 13.
HANDLE GRIP
1/4" x 1-1/2"
HEX BOLTS
5/16"
5/16"
HANDLE
FLAT
FLAT
TUBE
WASHERS
WASHERS
(SHORT)
HANDLE
TUBE
HANDLE GRIP
(LONG)
FIGURE 13
SLIDE
GATE
BRACKET
FLOW
CONTROL
ROD
FLOW CONTROL
MOUNTING BRACKET
1/4"
LOCK
NUTS