Datatool DT201 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Datatool DT201. Datatool DT201 15 pages.

To enter Long Term Storage Mode, disarm the DT201 and with ignition off hold down both buttons
on the two-button remote for 10 seconds. A loud bleep will be heard, and the DT201 system
will now be inactive.
To exit Long Term Storage Mode, turn the motorcycle ignition on the motorcycle indicators will
start to flash and the DT201 will sound a series of fast bleeps that rise in volume. Press the
Arm/Disarm button to disarm the DT201. If the Arm/Disarm button is not pressed the DT201 will
trigger fully and the siren will sound.
NOTE: Long Term Storage Mode should also be used to prevent the DT201 from triggering if
the motorcycle battery needs to be disconnected for any reason.
CAUTION: The customers insurance company may not include cover for an alarm in
Long Term Storage Mode.
The level of security is reduced when the DT201 is in Long Term Storage Mode.
The customer should always check the details of your insurance cover before using the
Long Term Storage Mode.
CAUTION: Prolonged storage of the motorcycle with the DT201 armed will result in battery
drain.
Excessive battery drain will cause permanent damage to the battery.
The motorcycle should be connected to an appropriate battery conditioner to maintain good
battery condition.

Bike Finder

The Bike Finder feature flashes the directional indicators so that the rider can identify the location
of their motorcycle from afar without disarming the DT201.
Bike Finder is only operational when the DT201 is fully armed and can be activated by pressing
the Programming button on the remote control for 3 seconds. The motorcycle indicators will flash
10 times then stop.
Pressing the Programming button during the directional indicator flashes will cause the flashing to
stop (Note: No need to press and hold).
The DT201 cannot be disarmed whilst the Bike finder Function is operational, triggering the alarm,
during the bike finder flashes will stop the flashes.

Panic Alarm

NOTE: The Panic Alarm does not operate with the ignition ON.
The DT201 offers a 'Panic Alarm' facility that will cause the DT201 siren to sound and the
motorcycle indicators to flash to attract attention. To activate the Panic Alarm, hold down the
Arm/Disarm button on the remote control for 3 seconds with the motorcycle ignition turned
off.
To cease the Panic Alarm, press the Arm/Disarm button on the remote. The Panic Alarm will
run for approximately 5 minutes unless stopped by the remote control.
Scorpion House, Drumhead Road, Chorley North Business Park, Chorley, Lancashire, England. PR6 7DE
Tel: +44 (0) 1257 249928 E mail:
CAUTION
CAUTION
Datatool is a brand of Scorpion Automotive Ltd
info@datatool.co.uk
DT201 Operation Guide Revision 1 24-07-2023
Web: http://www.datatool.co.uk
6