DVDO EDGE Supplément au manuel du produit - Page 6

Parcourez en ligne ou téléchargez le pdf Supplément au manuel du produit pour {nom_de_la_catégorie} DVDO EDGE. DVDO EDGE 16 pages. Dvdo edge high definition video processor & hub

Imprimer la page

Updating EDGE Firmware using a PC

1. Download the PC version of the EDGE firmware onto your computer from the website at www.dvdo.com/edge

2. Connect the Mini-USB to USB cable; the large end connects to your computer and the small end connects to EDGE.

3. Power up EDGE (if it is not powered up already).

4. Using your paperclip Reset tool, press the RESET button on EDGE and hold it until the front LED stops flashing and remains steady on.

This takes about 5 seconds.

5. Now, an EDGE icon should appear on your PC's desktop. EDGE looks like a mass storage device to your PC.

6. Double click on the EDGE icon. You should see a file (the file name will be EDGE_100.abt (or similar). Select that file and delete it.

7. Open the EDGE firmware file. You PC should have converted the ".zip" file to a file with a ".abt" extension. The filename should be

EDGE_110.abt (or similar). Copy the ".abt" file into the EDGE icon.

IMPORTANT: Make sure the file you are copying to EDGE has a .abt extension.

8. After the file has been copied, unplug the USB cable. This will reset EDGE; when it comes out of reset, it will be running the new

firmware.

After coming out of RESET, EDGE will be in a factory default state, which means that EDGE will run the setup Wizard. So, the first thing you

will see is the Wizard screen. You can either use the Wizard to restore your settings, or press the LEFT arrow button on the remote to exit

the Wizard.

You can verify that the new firmware is running by pressing the INFO button and using the arrow button on your remote to get to the firmware

version page.