Datavideo DAC-100 Pour commencer - Page 9

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Datavideo DAC-100. Datavideo DAC-100 15 pages. Important note to make dac-2/dac-100 work with pinnacle dv500
Également pour Datavideo DAC-100 : Pour commencer (13 pages), Manuel complémentaire (13 pages)

Imprimer la page

In the Playback Settings, is an Audio section. Make sure the box that says

"Play Audio on the output device only" is un-checked. This allows you to hear the audio

through the computer speakers when editing on your timeline. The sample rate should

match the quality of your video source.

-If the source plugged into the DAC is analog, using a yellow, red, and white RCA

composite, choose 32000

-If the source plugged into the DAC is digital, using a fire wire, choose 48000

hit OK to return to the General Settings screen

screen 4

Under the general settings, the settings should be as follows:

Editing mode: QuickTime

Quicktime is Adobe Premiere's default editing mode

All of the options listed under Time base and Time Display are compatible with the DAC

Timebase: 29.97

Time Display: this is how time will be displayed throughout your project. The

following will help you choose the appropriate setting:

For Broadcast or NTSC video: 30 fps drop-frame timecode

*This feature should be used if you will be using the timecode from your

original footage

For web or CD ROM: 30 fps Non drop-frame timecode

For PAL or SECAM video: 25 fps timecode

For motion picture Film: Feet + Frames at 16mm or 35mm