Datavideo DAC-7L Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Datavideo DAC-7L. Datavideo DAC-7L 13 pages. Datavideo dac-7l analog to sdi converter

Imprimer la page

Features

Video input connections include

1x Composite (CVBS), 1x S-Video (Y/C) and 1x Component Y.U.V. (Y,Pb,Pr)

2x SD-SDI (BNC) outputs both with embedded 2 channel audio

SD-SDI output signal that complies with the SMPTE259M-C standard at 270 Mbps

Connections for CH1/L and CH2/R on unbalanced RCA/Phono cabling

Connections for CH1/L and CH2/R on balanced XLR cabling

12 and 16 bit audio auto recognition

Space saving - camera and tripod mountable

Rugged case design with easy access to Audio and Video connections

12 Volt DC 1.5A input connector

Product Overview

Thank you for purchasing the DAC-7L Analogue to SD-SDI converter.

The DAC-7L is designed to be an affordable bridge between existing AV equipment

with SD Analogue Video outputs and SD-SDI equipment or mixers such as the

Datavideo SE-900 and SE-1000.

Due to the nature of SD-SDI signals, single BNC SD-SDI cable runs of up to 120m

should be possible with this unit before the signal would need to be re-clocked or

repeated.

The DAC-7L also has the ability to embed two channels of audio (or 1 stereo pair)

into the SD-SDI signal from either unbalanced RCA/Phono connections or balanced

3pin XLR connections.

NB:

Ensure the dip switch settings match the video signal being fed into the

DAC-7L.

Connecting both XLR and RCA / Phono audio sources at the same time is

not recommended.

A separate Time Base Corrector may be required if the unit is fed poor AV

signals from tape.

Before operating this device please also refer to the section marked SD-

SDI Cabling Advice