Frigicoll Kaysun KI-02.3 S Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Frigicoll Kaysun KI-02.3 S. Frigicoll Kaysun KI-02.3 S 16 pages. Wireless remote controller

Imprimer la page
Lock function
Press the "MODE" and "TIMER"button at the same time and last over 5s, then can
operate locking the remote controller.
In locked state, all the buttons are ineffective.
Press the "MODE" and "TIMER"button again at the same time and last over 2s, then
can close the locking.
Auto heat recycling mode function
ΔT: Temperature difference, means the different temperature between the indoor
temperature (Tf) detected by the remote controller and the remote controller setting
temperature (Ts). (The default difference is 3°C, the difference range is 1~4°C)
Example: ΔT is 1°C, Ts is 25°C.
When Tf-Ts>=+ΔT, it will operate COOL mode, the fan speed will be operated according to the setting
fan speed.
When Tf-Ts<=ΔT, it will operate HEAT mode, the fan speed will be operated according to the setting
fan speed.
Note: This function operation is only available when the indoor unit is in the heat recycling
three-pipe system.
When the remote controller selects the auto heat recycling mode, the remote controller
position must be placed at the signal receiving range of the air conditioner.
When the remote controller detects changes of the mode (cool to heat, or heat to cool), it will
send the changes to air conditioner.
One beep of air conditioner changed mode signals is giving out.
PRECAUCIONES Estas funciones sólo estarán disponibles si la unidad interior las
tiene.
ΔT instruction
Press buttons
setting state
ΔT setting state
Press buttons
Press ON/OFF button confirm and exit the setting
12
for 5S simultaneously, and then enter ΔT
to adjust ΔT you want