Datavideo MS-2850 Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Datavideo MS-2850. Datavideo MS-2850 20 pages. 4 channel upgrade i/o card
Également pour Datavideo MS-2850 : Manuel d'instruction (15 pages), Manuel d'instruction (8 pages)

Imprimer la page
Datavideo MS-2850 Manuel d'instruction

Installation

Transport & Placement
The MS-2850 is heavy – approximately 70Kg – Do not attempt to lift or move it on your own.
A minimum of two people are required to lift or move this product. There are two carry handles on either side
of the product, please use these handles to safely share the weight between the people lifting the unit.
Always use a trolley to safely transport the MS-2850 over distances of 2 Metres or more. The unit
should be always moved and placed in an upright position; do not place or try to move the unit in any other
way as damage or injury could result.
Place the MS-2850 on a strong, stable, flat surface that is capable of supporting the weight.
Do not use a folding or single leg table to support the MS-2850.

Opening the case

On each side of the MS-2850 case there are wing nut clasps securing the front and rear covers.
Undo each clasp by folding the wing nut out and then rotating it. The clasp can then swing free of the catch.
Once undone you can then remove the front and rear covers.

Unpacking the SE-2850 Control Panel Keyboard

The SE-2850 Control Panel Keyboard is held in its shipping position by a securing bolt on either side. To
lower the Control Panel first remove the securing bolts as indicated below.
The bolts can then be stored on each hinge bracket before lowering the Control Panel Keyboard.
8