Datavideo TLM-170P Manuel d'instruction - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Datavideo TLM-170P. Datavideo TLM-170P 20 pages. 17.3” full hd lcd monitor
Également pour Datavideo TLM-170P : Manuel d'instruction (16 pages)

Imprimer la page

Remote Set Up using an existing DHCP Network

The TLM-170P can be remotely set up using a computer web browser and the existing DHCP LAN. In this

way a gallery of TLM-170P monitors can be set up from one computer if enough network connections exist.

1. Use a normal Ethernet RJ-45 patch cable, straight through, to connect TLM-170P to an existing LAN

wall socket/switch.

2. Power on the TLM-170P monitor and press the MENU button to display the OSD menu.

3. Using the Up / Down buttons highlight SETUP NETWORK and press ENTER.

4. Set the menu option DHCP to ''ON'' and press ENTER.

The same OSD menu screen will now show the IP address given by the network to the TLM-170P

monitor. Make a note of this displayed IP address.

5. From a computer on the same DHCP LAN network open a web browser such as Internet Explorer or

Google Chrome. Delete the contents of the address bar at the top of the browser window and enter

the IP address of the TLM-170P that you just made a note of earlier and press ENTER.

6. The TLM-170P REMOTE SET UP interface should now be displayed in the web browser.

7. You can now use the computer's mouse and keyboard to change the monitor's settings.

Once the above steps have been completed the next time you want to change settings remotely you

can re-start from step 5.