Datavideo TLM-170P Manuel d'instruction - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Datavideo TLM-170P. Datavideo TLM-170P 16 pages. 17.3” full hd lcd monitor
Également pour Datavideo TLM-170P : Manuel d'instruction (20 pages)
Imprimer la page
COLOR ADJUST
You can choose:
6500
9300
USER COLOR
EXIT
SCAN SETTING
You can choose:
UNDER SCAN
OVER SCAN
INFORMATION
Display:
H. FREQUENCY
V. FREQUENCY
RESOLUTION
This mode will display the video resolution.
PIP SETTING
You can choose:
PIP
EXIT
Main/Background source is chosen on the front panel first before entering the PIP menu.
PIP window must be an analogue source if Main source is a digital source, or vice versa.
It is not possible to use analogue inputs for both PIP window and Main source.
It is not possible to use digital inputs for both PIP window and Main source.
Examples
If main source = HD-SDI [digital] then PIP window choice = YUV or Composite [analogue]
If main source = HDMI
If main source = YUV
If main source = CV1
LANGUAGE
You can choose:
English
Español
Deutsch
Español
Italiano
Dutch
Português
EXIT
SETUP MENU
You can choose:
OSD TIMEOUT
EXIT
RED
GREEN
BLUE
full image
cropped image
NTSC / PAL / SECAM
ON / OFF
SOURCE
POSITION
SIZE
SWAP
[digital] then PIP window choice = YUV or Composite [analogue]
[analogue] then PIP window choice = SDI or HDMI [digital]
[analogue] then PIP window choice = SDI or HDMI [digital]
[default]
5~120 sec
10
0~100
0~100
0~100
*see below
LF-TOP / RT-TOP / RT-BOT / LF-BOT
LARGE / SMALL / MID
swap PIP source and Main source