DVIGear HyperLight DVI-23100-AOC Manuel de démarrage rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} DVIGear HyperLight DVI-23100-AOC. DVIGear HyperLight DVI-23100-AOC 4 pages.

Imprimer la page
Cable Mating Diagram
Detaching and Attaching the DVI Docking Connector and Cable Pull Cover to the Cable End
1.
Hold the DVI Connector with the docking slot facing upwards.
2.
Insert the correct end of the cable into the appropriate DVI docking connector until it
clicks firmly in place. Ensure that the TX cable end is seated in the Transmitter docking
connector. The RX cable end should be seated in the Receiver docking connector.
3.
Secure the cable end and the docking connector with the provided fixation screw.
4. Two protective cable pull covers (p.n. DVI-2300-AOC-CVR) are included that can be
attached to the cable ends to facilitate ease of installation in narrow conduits as well as
in plenum spaces. Secure each cover with two provided Phillips head screws prior to
running the cable, then remove when finished.
Note 4: WARNING: The electronics in the DVI Docking Connectors are length-specific. Do not swap docking
connectors from cables of alternate lengths as this could result in degraded performance. Spare docking
connectors can be ordered as follows:
DVIGear
Model No.
DVI-2300-AOC-TX DVI-AOC, Passive Docking Connector, Tx
DVI-2300-AOC-RX DVI-AOC, Passive Docking Connector, Rx
DVI-2301-AOC-TX DVI-AOC, Active Docking Connector, Tx
DVI-2301-AOC-RX DVI-AOC, Active Docking Connector, Rx
4
DVI-23xxx-AOC-QSG-02 / January.2020
1
Product Description
2
Cable
Lengths
10 – 30 m
10 – 30 m
40 – 100 m
40 – 100 m
© 2018, 2020 DVIGear, Inc.
All Rights Reserved
4
3
DVIGear
1059 Triad Court, Suite 8
Marietta, GA 30062 USA
Toll Free:
888.463.9927
Tel:
+1.770.421.6699
Fax:
+1.770.234.4207
www.dvigear.com
(4)