AUSTHEAT AH860 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AUSTHEAT AH860. AUSTHEAT AH860 12 pages. Freestanding electrical hotplate & toaster

This electrical reset will allow the unit to begin
operating again. If the unit shuts down a
second time this is confirmation that the unit is
overheating and you should call Austheat
your local electrician for service.
A strong Pest-Eradication program should be in
place in any kitchen before installing this or any
similar machines.

CONTROL LAYOUT

Cook/Idle
switch – Left
Heating Zone
Left Zone
Thermostats
WARNING: THE ON/OFF SWITCH DOES NOT PROVIDE COMPLETE ISOLATION – REFER TO
"ELECTRICAL CONNECTION".
CONTROL DESCRIPTION
Both the hotplate and toaster have an idle/cook function, meaning you are able to have 2 pre-set
temperatures to switch between. Simply set the thermostats on the lower control panel to your desired
cooking or idle (non-peak cooking period) temperatures and switch between the two during busy
periods (or quiet periods) to save energy.
®
or
TOP DISPLAY PANEL CONTROLS
Grease Tray
Cook/Idle
switch – Right
Heating Zone
Lower Control Panel
Right Zone
Thermostats
WARNING: Pouring cold water onto a hot plate
will cause spitting and may result in damage to
the plate.
If required, the unit can be moved by lifting
from underneath the front, just above the door,
and pulling it along on the rear castors.
Cook/Idle
switch –
Toaster
On/Off
Switch
Thermometer
Displays
Toaster Controls
5