Datcon DT1600 U Series Manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Datcon DT1600 U Series. Datcon DT1600 U Series 20 pages. Ac voltage transmitters
Imprimer la pageDT1600 Ux xx xx
Select connection
cable
Preparing cables
20180621-V0
5. Connecting
5.1. Preparing the connection
Always observe the following safety instructions:
•
Connect or disconnect only in the complete absence of
line voltage
•
If overvoltages are accepted, overvoltage arresters
should be installed
•
You should take note the data concerning on the
overcurrent protection in installation.
•
Use only a screwdriver with appropriate head
Take note the suitability of the connecting cable
(wire cross-section, insulation, etc.).
You may use either solid conductor or flexible conductor.
Prepare the cable for the connection.
Strip approx. 8 mm insulation.
In case of using flexible conductor use crimped wire end.
11