Frigidaire FCRS201RFW0 Manuel d'utilisation et d'entretien - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Frigidaire FCRS201RFW0. Frigidaire FCRS201RFW0 11 pages. Commercial freezer/refrigerator glass door refrigerator
Insulation
The
insulated
space
on this cabinet
is sealed
to maintain
peak
efficiency.
DO NOT drill holes
in the cabinet.
Holes drilled
in the
cabinet
may
destroy
that
seal
and
damage
electrical
wiring
located
in the insulated
space.
It may also pierce
and damage
the sealed
refrigeration
system
in the insulated
space.
DAMAGED
ELECTRICAL
WIRING
OR WET INSULATION
CAUSED
BY DRILLING WILL VOID THE WARRANTY.
Appliance Start-up
Once the appliance
has been
located
in its permanent
location
and
the proper
power
and grounding
has been
provided,
the
following
items
must be checked
or completed:
Cool
Down
Period
For safe food
storage,
allow
24 hours
for the appliance
to cool
down
completely
before
loading
with
food.
The
appliance
will
run continuously
for the first
several
hours.
Do not place
any
food
in the appliance
until after the first 24 hours
of operation.
Thermostat
Setting
The
appliance
is shipped
from the factory
with
the thermostat
set at about
the mid-point
of the operating
range.
Adjustments
colder
or warmer
can be made
after
the appliance
has
been
running
for at least 8 hours. Allow at least 8 hours for temperature
stabilization
before
re-adjusting
the thermostat.
Defrost
Setting
The
appliance
is designed
to defrost
automatically
every
12
hours.
To set the time
of defrost,
wait
until the desired
time to
defrost.
With the notch
on the timer
knob aligned
with
the line
on the bracket
(Fig. A), turn the defrost
timer
knob
clockwise
slowly.
The timer
will click
several
times,
then
once
loudly,
at
which point the defrost
cycle begins.
The timer
knob will advance
through
the defrost
cycle, then
click loudly
at the end of the cycle
(Fig. B). The appliance
will defrost
automatically
every
12 hours
after the first defrost
cycle.
Fig. A
Position
of knob
before
turning
clockwise
to start
defrost
cycle (First
click)
Fig. B
Position
of knob at end
of defrost
cycle
(Second
click)
Features
NSF
and
FDA
Approved Adjustable Shelving
This appliance
is provided
with
NSF and FDA
approved
heavy
duty epoxy
powder
coated
adjustable
shelves.
The one with the
wires
that are angled
on the front
and back goes
on the floor of
the cabinet.
The
others
are placed
in the adjustable
stainless
steel shelf supports
that clip into the shelf support
strips on each
side of the interior.
Make
sure
to place the shallow
shelf in the
upper-most
position.
Shallow
Regular
Bottom
<
//
//
Front
Fixed
and
Rear
Swivel
Casters
This appliance
comes
with two (2) front fixed casters
with brakes
and two (2) rear swivel
casters.
The casters
allow the appliance
to be moved
with ease and then locked
in position
at its desired
location.
Fixed Caster
Swivel Caster