4qd PRO-360-S/HV Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 4qd PRO-360-S/HV. 4qd PRO-360-S/HV 20 pages.
Imprimer la page
1.
Introduction
The Pro-360 is an advanced digital PWM motor controller for currents up to 360A.
It uses a specialist microprocessor to control a full H-bridge design that does not
require relays for reversing. The display provides key information to the operator,
and can be mounted separately to the controller if required. It has a full range of
features and is very easy to configure if required.
2.
Do's and Don'ts
Warning – the Pro-360 does not have reverse polarity protection.
Connecting the battery wires incorrectly WILL destroy the controller.
Do
•
Do read the instructions fully
before installing.
•
Do take care to connect the
battery wires with the correct
polarity.
•
Do fit a motor suppression
capacitor, and ferrite rings.
•
Do twist the motor wires
together if possible.
•
Do call 4QD if you are
uncertain about something.
PRO-360 V2.3/4 10/20
Do not
•
Do not allow water to get onto
the circuit boards.
Page 2
www.4qd.co.uk