Austin Hughes Electronics CyberView RKP217-1601 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Austin Hughes Electronics CyberView RKP217-1601. Austin Hughes Electronics CyberView RKP217-1601 19 pages. 2u rackmount lcd monitor keyboard drawer with kvm switch
Imprimer la page
1.5
Important Information & Safeguards
•
Please read these safety instructions carefully
•
Keep this user manual for later reference
•
Disconnect the unit from the mains input power supply source before cleaning
•
Do not spray aerosol or liquid cleaners directly on the unit, use only a soft cloth for cleaning
•
Clean the LCD only with a soft anti static cloth
•
Avoid placing pressure on the LCD to prevent permanent damage
•
Rest the unit on a reliable surface when installing, a drop or fall may cause injury
•
Please note all cautions and warnings on the equipment
•
Never open the unit. Only qualified personnel should open the unit
•
Refer to section
conditions for the unit
•
Refer to sections
•
Refer to section
13.2
1.6
Preparation for Use
•
Carefully remove the unit from its packaging
•
Please check that the unit and its accessories match the packing contents in section
user manual
•
Please read this user manual thoroughly familiarising yourself with the unit
•
Place the unit on a protected work surface and carefully slide open the keyboard drawer
noting the friction stops on the slides to prevent movement of the keyboard whilst in use
•
Carefully slide open and lift the LCD screen to a convenient viewing angle
•
Plug up the DC power supply, whilst noting that the green LED on the external adaptor
should now be lit
•
You should now be able to see the LED lights on the unit functioning you could also follow
section
2.0
to familiarise yourself with the OSD (On screen display) of the unit
•
After removing the DC power input, carefully install the unit into the rack, noting section
1.5
of this user manual - important information and safe guards, and plug in all connecting
hardware (ensure all connecting hardware is powered down for this stage of the install)
•
Further information regarding the use of this unit can be found in the following sections of
this user manual
www.austin-hughes.co.uk
10.0
of this user manual regarding recommended storage and operating
11.0
and
12.0
of this user manual regarding troubleshooting of the unit
of this user manual regarding improper use of the unit
User Manual
1.4
of this
Page 4