Cooking Performance Group 351CPGSP18N Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cooking Performance Group 351CPGSP18N. Cooking Performance Group 351CPGSP18N 11 pages. Gas stock pot range
Imprimer la page
User Manual
351CPGDSPRN, 351CPGDSPRL,
351CPGSP18N, 351CPGSP18L
Operating Instructions
LIGHTING & SHUTDOWN INSTRUCTIONS:
CAUTION:
When lighting pilot and checking for leaks, do not stand with your face close to the
combustion chamber.
All Cooking Performance Group appliances are adjusted and tested before leaving the factory, effectively
matching them to sea level conditions. Adjustments and calibrations to assure proper operation may be
necessary on installation to meet local conditions or adapt to low gas characteristics; correct possible
problems caused by rough handling or vibration during shipment and are to be performed only by
qualified service personnel. These adjustments are the responsibility of the customer and are not covered
by our warranty.
Check all gas connections for leaks with a soapy water solution before lighting any pilots.
To Light:
1.
Turn the control valve to position 0, or OFF.
2.
Make sure all knobs are in a closed state.
3.
Wait for 5 minutes.
4.
Turn pilot valve(s) by adjusting the screw counter clockwise, then light standing pilot and adjust flame
¼ inch high..
5.
Turn ON gas valve(s) to light the main burner.
Complete Shutdown:
1.
For complete shutdown, shut OFF gas valve(s) and turn pilot valve(s) by adjusting the screw clockwise
to shut off gas to the pilot(s).
2.
Wait 5 minutes before next use.
Adjust Air Input:
1.
Remove control panel and unscrew damper solid screw
2.
Rotate damper to desired opening, observe flame, and adjust to appropriate degree
3.
Tighten screw damper solid screw to ensure equipment will not get loose in transportation
4.
Reinstall control panel.
8
www.cookingperformancegroup.com
.