Agri-Fab 190-653B Manuel du propriétaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Agri-Fab 190-653B. Agri-Fab 190-653B 12 pages. Utility carts
Imprimer la page
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
(1)
Screwdriver
(1)
Pliers
(2)
7/16" Wrenches
(2)
1/2" Wrench
(2)
9/16" Wrenches
1. Remove the hardware pack and all loose parts
from the carton. Be sure the carton is empty before
discarding.
2. Lay out all parts as shown in the carton contents.
DO NOT LEAVE THE CART UNATTENDED IN
UPRIGHT POSITION DURING ASSEMBLY. A
FALLING CART CAN CAUSE PERSONAL INJURY!
PAY CLOSE ATTENTION TO THE STABILITY OF
THE CART wHILE IT REMAINS IN AN UPRIGHT
POSITION. FOR BEST STABILITY, ASSEMBLE
ON A SMOOTH, LEVEL SURFACE.
3. Position cart body halves upright on a smooth level
surface such as a garage floor or a paved driveway.
See figure 2.
4. Assemble halves together using three 1/4" x 5/8" hex
bolts and 1/4" nylock nuts as shown in figure 2. Do not
tighten.
1/4" x 5/8" HEX BOLTS
FIGURE 2
CAUTION
1/4" NYLOCK NUT
5. Position the tailgate reinforcement bracket on outside
of cart as shown in figure 3. Assemble to the bottom of
the cart body using four 5/16" x 3/4" truss head bolts
and 5/16" nylock nuts. Do not tighten. See figure 3.
6. Position the tailgate guides on the inside of the cart
bodies with guide channels to the front as shown in
figure 3. Assemble using four 1/4" x 5/8" hex bolts and
1/4" nylock nuts. Do not tighten.
1/4" NYLOCK NUT
5/16" NYLOCK NUT
FIGURE 3
7. At this time, with the cart body halves pulled together,
tighten the four truss head bolts assembled in step 5
and then tighten the four hex bolts assembled in step 6.
Do not tighten the three hex bolts that were assembled
in step 4.
8. Carefully reverse the position of the cart so that it rests
on the tailgate reinforcement bracket, as shown in figure
4.
FIGURE 4
4
TAILGATE GUIDE
1/4" x 5/8"
HEX BOLT
5/16" x 3/4"
TRUSS HEAD BOLT
TAILGATE
REINFORCEMENT
BRACKET