Austlift 145080 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Austlift 145080. Austlift 145080 13 pages. Aussie fetch mini crane

Imprimer la page

Electrical Installation

The crane comes with a 3M electrical cable wire. Red one is positive terminal.

Black one is negative terminal. Connect the red and black wire with the

respective positive and negative terminal of the 12V battery. Plug the pedant

cable on the winch control box and then use the up/down buttons to operate

the crane motor.

Crane Installation Type

1. To Install on a Vehicle

There are four mounting holes (diameter 17mm) on the base, see picture

3 for detailed dimensions, drill four holes on a level surface of the vehicle,

lock up the flat washers, spring washers, bolts and nuts provided to fix

the crane on the vehicle. Make sure that the surface that the crane is

mounted to is level and that the crane is mounted firmly, otherwise

danger or injuries will be invited.

2. To Install on the Ground

Use expansion bolts to fix the crane base on the ground. Make sure that

the surface that the crane is mounted to is level and that the crane is

mounted firmly, otherwise danger or injuries will be invited.

1300 100 130

AUSTLIFT AUSSIE FETCH MINI CRANE