Austral Surveillance Mini DVR Cam Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Austral Surveillance Mini DVR Cam. Austral Surveillance Mini DVR Cam 6 pages.

Imprimer la page

c) Connecting to the computer: when the device is switched off or on standby (constant

red light) connect the USB cable to the computer. When the computer has recognized

the camera a box will come up on screen asking how you would like to proceed. Please

be patient when waiting for device to be recognized by computer as it takes time

depending on the type of computer you're using. If it takes too long, disconnect and

reconnect the device which should work.

Note: pressing buttons on the camera whilst it's attempting to connect may damage or

interfere with the connection.

If this box doesn't come up, left double-click on My Computer (on the front page of the

computer or Start > My Computer) and there should be a section for 'Devices with

Removable Storage'

While the footage is transferring from the device to the computer, the blue light will

flash rapidly.

d) Charging: when in charge mode the red light will be flashing, once it's finished the light

will be constant.

Note: to ensure the camera is charging to its maximum capacity, for the first 5

charges, leave it connected for up to an hour after it's fully charged (the light is

constantly red).

e) Setup Time/Date: when the device is connected to the computer and switched off, go to

the first folder for Removable Disk Drive e.g (E:\) or (F:\), then left click once on File at

the top left hand side of the screen and left click once on New then Text Document (see

picture below for rough idea).

Select option to open files in a folder

Select the camera drive. If

you're not sure which to

choose, left double-click on

one at a time until you find a

folder named _REC which

contains a folder named

100MEDIA. This is where your

recorded footage is saved.