Cookology TCH601 Manuel d'instruction - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Cookology TCH601. Cookology TCH601 16 pages. 60cm ceramic hob black
Imprimer la page Warning: Before obtaining access to terminals, all supply circuits must be
disconnected.
WARNING: Use only hob guards designed by the manufacturer of the
cooking appliance or indicated by the manufacturer of the appliance in
the instructions for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause accidents.
WARNING: The appliance and its accessible parts become hot during
use.
Care should be taken to avoid touching heating elements.
Power cord will not be accessible after installation.
For Installation instructions, please go to the section marked Installation.
2. Installation
Installing the ceramic hob
The kitchen area should be dry and aired and equipped with efficient
ventilation. When installing the ceramic, easy access to all control
elements should be ensured.
This is a Y-type design built-in ceramic, which means that its back
wall and one side wall can be placed next to a high piece of furniture
or a wall .Coating or veneer used on fitted furniture must be applied
with a heat-resistant adhesive (100 ℃ ).This prevents surface
deformation or detachment the coating.
Hoods should be installed according to the manufacturer's
instructions.
Assembly of ceramic hob :
Make an opening with the dimensions given
in the diagram for the hob to be mounted on
the worktop．
Check seal for perfect fit and overall cover.
Lower the ceramic hob into place and align
correctly.
Using a standard screwdriver, tighten the
tension clamps evenly starting at the centre and moving diagonal,
until the built-in rim is tight on the worktop.
Cut a hole in the worktop that corresponds with the drawing shown
above.
5