Cookshack Fast Eddy's Oven FEC500 Manuel de l'opérateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Cookshack Fast Eddy's Oven FEC500. Cookshack Fast Eddy's Oven FEC500 13 pages. Fast eddy oven
Également pour Cookshack Fast Eddy's Oven FEC500 : Manuel de l'opérateur (19 pages)
Imprimer la page1.800.423.0698
IQ4 CONTROLLER OPERATION
The IQ controller is equipped with two preset buttons for easy selection of common settings when using the
Cook Mode only. Pressing the button marked Ribs/Chickens will make the following settings:
Cook Temp 225°F
Cook Time 3 hours
Hold Temp 140°F
Pressing the button marked Briskets will make the following settings:
Cook Temp 225°F
Cook Time 12 hours
Hold Temp 140°F
Once one of these preset buttons has been pushed you may start a Cook cycle using these settings by simply
pressing Start.
The oven temperature displayed while the oven is running is the actual air temperature inside the oven. In order
to see the set cooking temperature or holding temperature, briefly press the corresponding button.
The IQ controller is equipped with a power backup system to prevent your Smoker from 'forgetting' the setting
in the case of a power failure. The IQ will wait out power failures of up to 2 minutes and resume normal cook-
ing. This backup system means that turning off the Master Switch will not cause the IQ to forget its current in-
structions for up to 2 minutes. The reset button may be used to clear these current instructions and cause the IQ
to start over from the beginning.
Recommended cooking times and temperatures are based on full loads with no holding cycle. Larger or smaller
loads or the addition of holding time may require adjustment of cooking time and temperature.
When you think the product is finished, turn the switch to the OFF position. Wait ten minutes before opening the
oven door to check the product for doneness. When the product is done to your satisfaction, remove from the
smoker.
Fast Eddy's Model FEC500
www.cookshack.com
Directions for using the Controller
1. Turn Master Switch ON.
2. Set cooking time by pressing and holding the COOK TIME
button while using the ADJUST TIME OR TEMP buttons
to change settings
3. Set cooking temperature by pressing and holding the
COOK TEMP button while using the ADJUST TIME OR
TEMP buttons to change settings..
4. Set holding temperature by pressing and holding the
HOLD TEMP button while using the ADJUST TIME OR
TEMP buttons to change settings
5. Press START.
6
Ver. 06.2