AUSTRALIAN MONITOR XRS12ODV Manuel d'installation et d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AUSTRALIAN MONITOR XRS12ODV. AUSTRALIAN MONITOR XRS12ODV 12 pages. Passive, powered and outdoor loudspeakers
Également pour AUSTRALIAN MONITOR XRS12ODV : Manuel d'installation et d'utilisation (13 pages)
Imprimer la page
XRS8B shown here
XRS8B
2 Way Full Range Speaker
Built-in Passive 2 Way Crossover
Frequency Response (-3dB)
2+
1-
Sensitivity (dB 1W 1m)
Impedance
2-
1+
Recommended Max Power (Program)
1+ 1- : INPUT
SN:
1
1
Speaker Input
The input connector is a 4 pole twist lock, speakON
compatible connector. Pins 1+ and 1- are wired to +ve and
-ve respectively of the speaker. The XRS10 and XRS12 have
two connectors. They are wired in parallel so either connector
can be used as an input, the other as a loop through.
XRS SERIES INSTALLATION AND OPERATION MANUAL
XRS REAR PANEL – PASSIVE AND CONSTANT VOLTAGE
65Hz-18kHz
92 dB
8 Ohm
200W
Made in China
XRS8ODV
XRS8ODV
2 Way Full Range Speaker
Weather Proof 100V/70V
Frequency Response (-3dB)
65Hz-18kHz
Sensitivity (dB 1W 1m)
Impedance
Recommended Max Power (Program)
100V 100W/70V 50W
100V 50W/70V 25W
100V N.C/70V 100W
100V 25W/70V N.C
8 OHM BYPASS
SN:
Made in China
1
2
1
Voltage Tap Select Switch
A switch on the back of the XRS ODV speakers allows
you to select the desired transformer tap. Each speaker
has 3 taps at 70.7 V and 100 V, as well as a low impedance
transformer bypass option.
2
Fly Lead (Speaker Input)
The XRSODV series speakers come supplied with a 2 core
flying lead as input to the speaker. The flying lead wires
are red (positive +) and black (negative -) and are used as
an input to the speaker for both constant voltage and low
impedance inputs
92 dB
8 Ohm
200W
PAGE 5