CookTek MC25506-200 Manuel du propriétaire - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} CookTek MC25506-200. CookTek MC25506-200 17 pages. 4-hob and 6-hob cooktops
Imprimer la page
Before operating your 4- or 6-hob unit, perform the following tasks:
• Remove all packing material and save for subsequent shipment or in case of
concealed shipping damage.
• Keep unit away from other heat sources and allow at least 2" (51 mm) clearance for
air circulation at sides, front, and rear of the unit. If either the air intake or exhaust
outlet is blocked, the internal temperature will rise, causing an error code to occur.
• Install all four legs on the bottom of the unit.
• Please make sure that the power cord(if supplied) is firmly attached to your
CookTek unit BEFORE plugging the unit into the power receptacle and before
attempting operation. If the unit is not equipped with a power cord, have a qualified
electrician connect the unit to the power supply.
Grounding Instructions:
The unit must be properly grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing a safe path for the electric
current. If the unit has a power cord with a 4- or 5-prong grounding plug, a compatible
and properly grounded outlet must be used. It is the owner's responsibility to connect
the unit to an appropriate wall receptacle, or have a qualified electrician connect the
appliance to the power supply.
For your safety, never cut, remove, or disable the electrical (ground) connection from
the plug. Never use an adapter plug or an extension cord with the unit.
WARNING: Electric shock can result from an improperly grounded plug. Please
consult a qualified electrician if you have any questions about these grounding
instructions.
Every installation site has different electrical wiring. Because many different local
codes exist, it is the Owner and Installer's responsibility to comply with those codes.
CookTek is not responsible for any consequential damages as a result of failure to
comply with installation requirements.
• Read all installation instructions carefully before starting installation.
• Remove 4- or 6-hob unit carefully from carton.
• Remove all loose packaging and accessories and save for subsequent shipment or
in case of concealed shipping damage.
• It is the responsibility of the installer to comply with all federal, state, and local
codes.
• Any installation not matching the specifications discussed in this manual
automatically voids the product's warranty.
CookTek's 4- or 6-hob units are in conformance with UL 197 and CSA 22.2 No. 109
standards and bears the commercially rated approvals. CookTek's 4- or 6-hob units
are in conformance with European Economic Area standards and bears the CE
marking signifying European Conformity.
BEFORE OPERATION
APPROVED FOR COMMERCIAL USE
2
Manual BOH Cooktop 10336_A USINTL