AFC AFC01 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AFC AFC01. AFC AFC01 6 pages. Lcd monitor arms

Imprimer la page

06-R

max

min

1.800.663.3412

Assembly Guide

Clamping system is well assembled in standard packing.

However, user could disassemble this unit and re-assemble for

thicker desk tting by adjusting cranking bar & clamp position.

At least two screws should be used for clamping system.

Remove pad cover and adhere to bottom o arger L bracket.

Suggested thickness of desk is

Check your LCD panel rst to nd which VESA

standard interface it supports before

assembling.

75 mm x 75 mm VESA standard interface

Secure the arm to the

screws 08

100 mm x 100 mm VESA standard interface

Secure 100 x 100 mm plate 04 to the arm with

screws 08, then secure the arm to the rear

06-L

Remove the rubber cap 05, use the Allen key provided to

adjust the weight capacity from

The weight is originally set up at

ADJUSTMENT:

Be sure to adjust the weight in a vertical position as illustrated.

Twist the Allen key in a clockwise direction for less weight;

counterclockwise direction, more weight. Make sure of the

LCD panel weight prior to adjusting the weight according to the

instruction.

Panel weight

4 kgs

8.82 lbs

5-6 kgs

11.02-13.23 lbs

7-8 kgs

15.43-17.64 lbs

0.59"-3.94"

rear of the LCD panel with

The loading weight of universal joint is initially

xed below

13.23 lbs.

purchased about adjusting weight over

Press two sides of 06-L lightly and remove 06-R ,

06-L outwards. Let the cables run through the

bottom of the arm and then press cable cover 03

to the arm to x cables steady. Assemble 06-L

and 06-R back to arm after nish cable

6.61 lbs

6.61 lbs.

Counterclockwise direction

4 turns

5-7 turns

8-10 turns

www.afcindustries.com

Consult the store where you

13.23 lbs.

managing.

17.64 lbs.