4Sight THE ORIGINAL DASH CAM X1 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 4Sight THE ORIGINAL DASH CAM X1. 4Sight THE ORIGINAL DASH CAM X1 10 pages.

16. LCD power Save (i.e.: screen saver): off (default),1 minute,3

minutes.

17. Protect Level (Auto save G-Sensor): high, medium (Default),

low, and close.

18. Parking monitoring: high, medium, low, and close. (The

default)

19. WIFI: Turn on (Default), or OFF.

20. Format SD-card: Yes, no. (Deletes all content on the TF card

even locked video bringing it back to a fresh new state)

21. LDWS Calibration: manual calibration of the LDWS for your

vehicle.

22. Firmware version: displays the current firmware version

23. Reset setup: Yes, no. (When you select this the Dash Cam

will return to factory default settings.)

Electronic dog features set

Turn on the Dash Cam and stop the camera from recording, press

and hold the menu key (8) for 5 seconds, you will be in the

settings menu. Quickly press menu key (8) again to switch to the

Speed trap alert menu, press the up key (9) Or down arrow (10)

to Select a specific parameter, press the OK button (11) To

confirm your selection. When the Setup is complete, continue to

press and hold menu key (8) to Exit the settings interface. The

parameters are:

1. Volume setting: mute, volume 1, volume 2, volume 3, volume 4,

volume 5, Volume 6 (Default) Volume 7 Volume 8. (sets the

volume of the alerts