austriamicrosystems AS5132 Manuel d'utilisation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} austriamicrosystems AS5132. austriamicrosystems AS5132 7 pages. Programmable magnetic rotary encoder

Imprimer la page

AS5132 Magnetic Rotary Encoder

Adapterboard Operation Manual

2.2

Mounting the AS5132 adapter board

Rotating shaft and magnet holder

Bearing

Not ferromagnetic (plastic, brass, copper,

stainless steel, aluminum...)

Casing

Spacer

M2~M2.5 Screw + nut

AS5132-AB PCB

Figure 2: AS5050 adapter board mounting and dimension

A diametric magnet must be placed over on under the AS5132 encoder, and should be placed centered in y direction and 4.1mm

with respect to PIN1 in x direction. Tolerance of 0.5mm.

The airgap between the magnet and the encoder casing should be maintained in the range 0.5mm~2mm (magnet related).

The magnet holder must not be ferromagnetic. Materials as brass, copper, aluminum, stainless steel are the best choices to make

this part

Revision 1, April 2012

Page 2 of 6