Austro Flamm SPARK Manuel - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Austro Flamm SPARK. Austro Flamm SPARK 16 pages.
Imprimer la page
Spark
Heating in-between seasons
Heating the stove in between seasons, when the
outside temperatures are higher, the flue gases may
not be able to escape completely and this may lead to
disturbances in the chimney draught, especially if the
temperatures are rising suddenly. The stove has to
be charged with less wood and the primary air has to
be increased so that the wood can burn down faster
(with visible flames) and thus the chimney flue can
stabilize.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description
Flat gasket 8 x 2 mm (1,6 m)
Round gasket 10 mm (1,3 m)
Keramott
Description
Spark bottom left, keramott
Spark bottom right, keramott
Spark grate
Spark wood retainer, keramott
Spark lateral left, keramott
Spark rear, keramott
Spark baffle plate, keramott
Spark lateral right, keramott
Other parts
Description
Spark door glass
Stove lacquer
Wood lighter can à 100 pcs.
Glass cleaner ½ litre
Accessories
You can obtain floor plates made of glass or steel, hearth accessories or care products or the Heat
Memory System for heat storage from your certified dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer only. This will guarantee that your
stove functions properly and safely.
The fireplae must not be amended.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if
necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned
regularly by the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection
intervals. An expert should inspect the stove annually..
6
Chimney fire
A chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel is
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have an
expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney
Nr. drawing
Part number
21/22
710096
20
710319
Nr. drawing
Part number
1
712342
2
712301
3
716408
4
712302
5
712341
6
712343
7
712303
8
712300
Nr. drawing
Part number
23
716724
--
650002
--
640162
--
640070
Keramott numbering = installation instructions!
english
.