Austro Flamm 55x55x Manuel d'instruction - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Austro Flamm 55x55x. Austro Flamm 55x55x 17 pages. Inserts
Également pour Austro Flamm 55x55x : Manuel de l'utilisateur (10 pages)
Imprimer la page
20. What to do if, ...?
... if the fire smoulders or goes out by itself?
Is the throttle valve open?
•
•
Is the deflection damper of the heat exchanger in the right position?
•
Is the combustion air flap open (+)?
•
Do you use dry enough wood?
Is the outside temperature too high (>15C° )?
•
... the room does not get warm enough?
•
Are all convection air in-/outlets open?
•
Does the deflection damper deflect the flue gases through the heat exchanger?
Is the chimney draught too high?
•
... the fire burns down too fast and uncontrolled?
•
Has the combustion air supply been throttled after reaching the operating
temperature in the combustion chamber (+ / -)?
Are all gaskets on the inside of the door frame in good condition?
•
•
Has the insert door been closed properly?
•
Is the chimney draught too high?
... the door glass soots too fast?
A gradual sooting of the door glass after 8-10 hours of operation is normal.
Has dry, natural wood been used?
•
•
Has the insert reached the operating temperature?
21. Information for the stove fitter in case of a warranty
Please contact your stove fitter, if any defects should occur on your fireplace. The stove
fitter/Austroflamm dealer needs the following information about your insert:
– serial number and type (insert name)
– original sales invoice (sales date)
On the corner models the name plate is fixed on the rear behind the left/right lateral Keramott.
1. remove baffle plate
On all other inserts the name plate is fixed under the centre Keramott/grate in the combustion
•
chamber.
2. remove left/right lateral Keramott
name plate
name plate