aFe Power 46-20299-B Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} aFe Power 46-20299-B. aFe Power 46-20299-B 16 pages.

Figure B

Refer to Figure B for Steps 7-12

Step 7: Under the vehicle you will need to remove the six bolts securing the skid plate to the truck.

Step 8: Once the skid plate is removed disconnect the pressure relief valve tube on the driver side of the

vehicle right above the intercooler tube connection by twisting it a ¼ turn counter-clock wise,

then gently pulling it back to separate it from the canister and twisting the entire tube out of the

way.

Step 9: On the driver side of the vehicle loosen the clamp using a 7mm socket or nut driver that is

securing the cold side intercooler tube to the 3-1/2" rubber hose and disconnect the hard plastic

tube from the rubber coupling.

Step 10: Once the rubber hose is disconnected remove the tube from the top of the vehicle.

Step 11: Use a small screwdriver to remove the wire retaining clip at the lower intercooler tube

connection on the driver side of the vehicle.

Step 12: Pull the lower tube connection apart and remove the lower half of the intercooler tube from the

vehicle.

Page 5

REMOVAL

aFepower.com