4x4 TOUGH 18-22543 Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 4x4 TOUGH 18-22543. 4x4 TOUGH 18-22543 12 pages. 4wd awning

These poles, which are

fixed to the aluminium

extrusion at one end,

should be swung out,

and the lower portion of

the leg, which has a twist

lock feature, should be

adjusted to the desired

length. [Fig. 10]

The poles must then be secured by way of guy

ropes and pegs. [Fig. 11]

Repeat the process on the other side of

the awning.

The awning is now free standing beside the

vehicle. For further stability, deploy the two

horizontal torsion poles contained in the

aluminium extrusion which forms the backbone

of the awning. [Fig. 12]

Swing these poles outward (they are secured at

one end). Disengage the twist lock mechanism,

and extend the poles to allow the tip of the pole

to be inserted into a specially drilled hole in the

aluminium extrusion (around which the side

awning was wrapped) [Fig. 13]

FIG. 10

FIG. 11

FIG. 12

FIG. 13

FIG. 6