4x4 TOUGH 18-22543 Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} 4x4 TOUGH 18-22543. 4x4 TOUGH 18-22543 12 pages. 4wd awning

2. Fitment to roof tray base using supplied L brackets.

•

The orientation of the brackets is with the longer arm of the L bracket affixed to the

roof tray.

•

The shorter arm of the L bracket is attached to the side awning.

•

The part of the L bracket attached to the awning can either be pointed upward or

downward; however it can only be downward if there is sufficient clearance for the

doors of the vehicle to open. Be aware in making this decision the awning will extend

beyond the "L" and a further allowance of 100mm below the L bracket is required.

•

Having made the decision on the orientation of the "L" brackets, it is now time to

attach the L brackets to the roof tray.

•

Attachment of the L bracket by T bolts is

recommended [Fig. 2], however in some cases it

will be necessary to drill holes and use the M6

bolts supplied.

•

The final position of the side awning should

be parallel with the direction of the vehicle

when travelling.

•

Insert the heads of 4 of the M6 bolts into the bolt

head channel in the aluminium moulding. [Fig. 3]

•

With the assistance of a second person, raise

the side awning to the height of the affixed L

brackets, position the M6 bolts to align with the

holes in the L bracket.

•

Insert the M6 bolts into the holes in the L

bracket and attach the M6 Nyloc nuts.

FIG. 2

FIG. 3