2Face Time Keeper Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 2Face Time Keeper. 2Face Time Keeper 18 pages.

Imprimer la page

Green light reduces hyperpigmentation, discoloration,

freckles, sun damage, and age spots. It lightens and

reduces existing pigmentation, improves overall skin

tone, and protects skin from premature discolorations

without the use of harmful skin lightening

3) Blue RGB Light (430 - 450 nm Wavelength)

Blue light reduces inflammation and drastically boosts

skin recovery while decreasing skin oiliness by

lowering excess sebum production.

4) White RGB Light (All the Red, Blue and Green

lights work together)

Compound the benefits of red light, blue light and

green light. Comprehensively balance and care your

skin, reveal you perfect skin condition.

Treatment

1) Turn the unit ON by pressing the PHOTON button.

The first light is Green Light, to show the Photon

function is turned on. It has low power testing

function, when the power is lower than 3.0Volts, the

green indicate light will be twinkling.

2) The Second light is RGB Light, which shows the

Photon therapy mode is working. Adjust the Light

mode to your aimed function by pressing the

PHOTON button repeatedly. Place the treatment

surface (massage head) on your skin, the RGB Light

Indicator will automatically activate.

Apply light pressure while slowing moving the device

in small circular motions, the treatment surface

temperature will slowly increase.

Press one time, the Red light works and the RGB

Light Indicator turns Red;

Press second time, the Green light works and the

RGB Light Indicator turns Green;

Press third time, the Blue light works and the RGB

Light Indicator turns Blue;

Press forth time, the White light works and the RGB

Light Indicator turns white, that means all the Red,

Green and Blue lights work simultaneously.

Note:

a) Only when the massage head touches the skin can

the device work. There is 1 minutes for the device to

detect the human body induction. The device will turn

off automatically if no human body were detected in 1

minutes.

b) The White light works and the Function indicator

turns white, that means all the Red, Green and Blue

lights work simultaneously.

3) Perform the treatment for 5~7 minutes on each

area.

4) It is recommended to apply a small amount of

Moisturizing cream on the treated skin areas after

each session and to massage it gently in circular

motions.

5 Maintenance

After each session, it is recommended to clean the

device.

1) Turn the device OFF by pressing the EMS and

PHOTON button.

2) Unplug the device from the electrical outlet.

3) This device is designed for household use and is

virtually maintenance free. To clean the head and

body of this device, use a cloth only. Do not use

strong chemical cleaners.

4) If the cord or device is damaged or does not

operate properly, contact the distributor.

Never allow the power supply cord to be excessively