BENDIX TP-3 Service Data - Page 4
Parcourez en ligne ou téléchargez le pdf Service Data pour {nom_de_la_catégorie} BENDIX TP-3. BENDIX TP-3 4 pages. Tractor protection valve
Imprimer la page
4. Install both plunger o‑rings – top and bottom – in their
proper grooves.
5. Place the plunger and valve assembly in the valve body.
6. Install the cap head screw, diaphragm washer with the
cup side up, and diaphragm into the diaphragm seat.
7. Place the inlet valve spring into the plunger.
8. Install the diaphragm seat o‑ring in the body.
9. Position the diaphragm seat assembly over the spring
and plunger assembly and force it into the body.
10. Replace the date code washer and install the retaining
ring making sure the retaining ring snaps fully into the
groove.
Log-on and Learn from the Best
On-line training that's available when you are 24/7/365.
SD‑03‑3652 Rev. 008 © 2019 Bendix Commercial Vehicle Systems LLC, a member of the Knorr‑Bremse Group • 12/2019 • All Rights Reserved
4
Visit brake-school.com.
TESTING SERVICED BENDIX
Perform the operating and leakage checks as outlined in
previous section.
TP-3
VALVES
®
®