BENDIX DOUBLE ANCHOR PIN CAM BRAKE Manuel de description générale - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de description générale pour {nom_de_la_catégorie} BENDIX DOUBLE ANCHOR PIN CAM BRAKE. BENDIX DOUBLE ANCHOR PIN CAM BRAKE 12 pages. Double anchor pin cam brake

BENDIX DOUBLE ANCHOR PIN CAM BRAKE Manuel de description générale
8. Loose lining.
9. Cracked lining at
rivet holes or
bolt holes.
10. Elongated rivet
holes.
SYMPTOM
1. Brake drum heat
checked.
2. Excessive scoring
of drum.
A. Improper size rivets (too long, too
short, improper diameter).
B. Improper crimping of rivet.
C. Enlarged rivet holes in shoe.
D. Incorrect lining hole size or counter
bore depth.
E. Rust build up on shoe table.
A. Overtightening bolts.
B. Wrong type rivets or bolts.
C. Rivets not properly crimped.
D. Dirt or rust on shoe table.
E. Wrong size lining counter bore.
A. Loose rivets or bolts.
BRAKE DRUM TROUBLESHOOTING CHART
CAUSE
A. Out of round brake drum.
B. Eccentric mounting of drum.
C. Loose wheel bearing.
D. Glazed linings.
E. Improper friction materials for duty
cycle of vehicle.
F. Overworked brake.
G. Driver abuse.
H. Wrong drum, too light.
A. Defective brake lining.
B. Abrasive material between lining and
drum.
C. Soft drum.
D. Excessive lining wear, rivets
contacting drum.
E. Drum not turned at last reline.
F. Build up of abrasives in rivet holes.
A. Re-rivet.
B. Re-rivet.
C. Replace part.
D. Replace linings.
E. Clean, remove rust and paint shoe
A. Correct as required.
B. Replace part.
C. Replace lining.
D. Clean, remove dirt and debris.
E. Replace linings.
A. Replace shoe and lining.
REMEDY
A. Turn, per manufacturer's
specifications.
B. Inspect wheel and drum and
replace defective part.
C. Correct as required.
D. Replace linings.
E. Consult vehicle manufacturer.
F. Check for proper brake balance.
(Ref; Bendix procedure to check
out system.)
G. Correct as required.
H. Replace part.
A. Replace linings.
B. Clean, remove dirt and debris.
C. Check hardness on flange. Should
be 187 Brinnel minimum.
D. Replace lining.
E. Turn per manufacturer's
specifications.
F. Blow out debris.
11