Airwell RC 08B Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Airwell RC 08B. Airwell RC 08B 7 pages.

Imprimer la page

OPERATIION

DEHUMIDIFYING (DRY)

1. Press the ON/OFF (

) button and switch the air condioner ON.

2. Set the MODE selector switch to "DRY"

3. Press the + or - buttons to set the desired temperature (Adjustable temperature

range is 17℃ and 30℃(62-88F)).

Note: You cannot switch the fan speed in AUTO mode, it has been automatically

controlled.

THE DISPLAY SHOWS THE

SELECTED TEMPERATURE.

NOTE

Use DRY operation when you want to reduce the humidity in the room.

Once the room temperature reaches the set level, the unit repeats the cycle of turning on

and off automatically

During DRY operation, the fan speed is automatically set to low or stops to prevent overcooling .

FAN ONLY

If you want to make air circulate without any temperature control, follow these steps:

1. Press the ON/OFF (

) button and switch the air conditioner ON.

2. Set the MODE selector switch to "FAN"

ADJUSTING THE FAN SPEED

AUTOMATIC

Simply set the FAN SPEED selector to the

automatically controls the fan speed when the AUTO mode is selected. When the air

conditioner starts operating, the difference between the room temperature and the set

temperature is detected by the microcomputer which then automatically switches the

fan speed to the most suitable level.

position . A microcomputer

MANUAL

If you want to manually adjust speed just set the FAN SPEED selector as desired.

Each time the button is short pressed, the fan speed is changed in sequence:

4 fan speed setting:

(

(Low)

(

(Medium)

(

(High)

SILENT MODE

To select the silent mode, hold down the Fan Speed button for at least 2 seconds and

then you can switch to the silent mode.

SLEEP MODE

The SLEEP mode enables you to save energy.

1. Set the MODE selector to cool, dry or heat.

2. Press the SLEEP button.

3. The

mark appears on the display. Press the SLEEP button again to release

the SLEEP function.

What does the SLEEP mode mean ?

In this mode, the air conditioner will cool or heat the room to the set

temperature. After about 1 hour, the air conditioner will automatically reset the

set temperature as follows (also refer to graphs).

OPERATING MODE

Heating

Cooling

OPERATIION

( Auto)

SET TEMPERATURE CHANGE

Lowered by 1 ° C

Raised by 1 ° C