Bendix CVS SmarTire TPMS Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Bendix CVS SmarTire TPMS. Bendix CVS SmarTire TPMS 12 pages.

Imprimer la page

1. Troubleshooting

Hold the SmarTire

with the transmission end pointed towards the tire's

sidewall adjacent to the sensor 's location

approximately two (2) inches away from the tire's

surface. Press and release the Initiate/Learn Button

(

) (a single beep will be heard) and keep the tool

in place for five (5) seconds until four (4) quick

beeps are heard.

Note: Do not hold down the Initiate/Learn button (

Once triggered, it can take up to 30 seconds for the

system to receive the transmission and complete

the learn process. The ID code edit box for the

wheel position will update with the new ID code

and the Bendix

ACom

will turn yellow after a successful communication.

Repeat this process for all the wheel positions that

need to be programmed.

Note: The following warning may appear if you are learning

more than one tire position:

TPMS Low Frequency (LF) tool

symbol for that location

"Learn process may fail if sensors are relocated or

swapped and the configuration is not written to ECU.

Would you like to continue the learn process anyway?"

Press the OK button to continue the process.

It is important to save the changes you have just

made. After the system has learned the ID codes

for the targeted wheels, select the Write to ECU

button to save them.

A dialog box will appear showing the progress.

Look for the following confirmation dialogue box.

"The configuration has been successfully written to the

ECU."