dymax SD-100 Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dymax SD-100. dymax SD-100 20 pages. Digital syringe dispenser
Également pour dymax SD-100 : Manuel de l'utilisateur (20 pages)

Imprimer la page

To use timer mode, you can either press the SHOT button on the front panel of the

SD-100 unit or press down on the foot pedal.

Cycle Mode

Cycle mode allows the user to create a repeating cycle of dispensing. This is programed by

setting a wait time between dispensing. This mode is reliant on the previous setting that was

made in timer mode to determine the length of dispensing during the cycle.

For example: If you would like to dispense for 1 second, then wait for 5 seconds, and cycle

these times over again, you would need to have already set your timer mode for

1 second (see previous page for these instructions). To set the 5 second wait time in your cycle,

follow the directions below.

Press the MODE button until the cycle mode is selected.

Press the SET button. The first digit on the right side of the digital display will start

blinking.

Press the ◄ button two times. The third digit from the right should be blinking.

Press the ▲ button five times. The display should now show a 5 second wait time. (To

adjust the decimal refer to page 15)

Press Exit/Mode to save as current setting.

To use the cycle mode, press the SHOT button on the SD-100 to activate the cycle. To

deactivate the cycle, press the EXIT button.

Saving Dispense to Memory

The SD-100 has the storage capacity for up to 9 programs that can be saved to its memory for

future recall. The memory will always save your current settings for the particular mode you

are in.

For example: If you want to save your current timer mode setting to Program 9, you will first

need to select timer mode then proceed with saving. You can also save your cycle mode

settings to Program 9 by following the same procedure.

To save your current settings to memory address 9, follow the instructions below.

SD-100 Digital Syringe Dispenser User Guide