Active Key AK-PMH2 Instructions

Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} Active Key AK-PMH2. Active Key AK-PMH2 2 pages. Wireless hygiene mouse with scroll wheel sensor

Imprimer la page
Instructions
and Safety Information
AK-PMH2OS-F
Wireless Hygiene Mouse with Scroll Wheel Sensor
Quick Start:
1.
Take out the USB receiver dongle
2.
Insert the supplied batteries as marked inside the battery
compartment
3.
Close the battery cover and tighten the screws
4.
Connect the dongle to a free USB port at your PC and start your
computer
5.
Start using the mouse after automatic driver installation has completed
Note: The mouse will enter STANDBY MODE after 8 minutes of inactivity and
can be resumed into ACTIVE MODE via the left or right mouse button.
Active Key GmbH & Co. KG
Phone: +49(0)9241/48337-0
Brunnenäcker 6
FAX: +49(0)9241/48337-29
D-91257 Pegnitz
E-Mail:
All rights reserved. Copy or duplication, except for personal use, not permissible
without specific prior written consent by Active Key GmbH & Co. KG.
Contents are subject to change without notice. Errors excepted.
Copyright by Active Key GmbH & Co. KG.
Version 20210419rp
Instructions
and Safety Information
AK-PMH2OS-F
Wireless Hygiene Mouse with Scroll Wheel Sensor
Quick Start:
1.
Take out the USB receiver dongle
2.
Insert the supplied batteries as marked inside the battery
compartment
3.
Close the battery cover and tighten the screws
4.
Connect the dongle to a free USB port at your PC and start your
computer
5.
Start using the mouse after automatic driver installation has completed
Note: The mouse will enter STANDBY MODE after 8 minutes of inactivity and
can be resumed into ACTIVE MODE via the left or right mouse button.
Active Key GmbH & Co. KG
Phone: +49(0)9241/48337-0
Brunnenäcker 6
FAX: +49(0)9241/48337-29
D-91257 Pegnitz
E-Mail:
All rights reserved. Copy or duplication, except for personal use, not permissible
without specific prior written consent by Active Key GmbH & Co. KG.
Contents are subject to change without notice. Errors excepted.
Copyright by Active Key GmbH & Co. KG.
Version 20210419rp
As distributor of batteries, we have the following obligations under
§18 BattG:
1) Batteries can be returned free of charge after use in the commercial firm.
2) End users are legally obliged to return used batteries.
3) Manufacturers of batteries are required to mark batteries with the
following symbol before placing them on the market for the first
time:
The manufacturer of batteries shall label batteries containing more than
0.0005% by mass of mercury, more than 0.002% by mass of cadmium or
more than 0.004% by mass of lead, before placing them on the market for
the first time with the chemical symbols of metals (Hg, Cd, Pb) in which the
limit is exceeded. The characters are to be applied below the symbol.
Safety Note: The enclosed batteries must not be charged!
Hereby Active Key GmbH & Co. KG declares that the aforementioned type
of radio equipment with the product models HM803 (Medical Wireless
Mouse) and WMD (Wireless Mouse Dongle) complies with the RED
2014/53/EU directive. The full text of the EU declaration of conformity is
available at the following internet address:
http://www.activekey.de/ce-doc/CE_DOC_RED_AK-PMH2.pdf
Delivery Content:
- 2,4 GHz wireless mouse
- 2,4 GHz USB-receiver
- 2x AAA batteries
As distributor of batteries, we have the following obligations under
§18 BattG:
1) Batteries can be returned free of charge after use in the commercial firm.
2) End users are legally obliged to return used batteries.
3) Manufacturers of batteries are required to mark batteries with the
following symbol before placing them on the market for the first
time:
The manufacturer of batteries shall label batteries containing more than
0.0005% by mass of mercury, more than 0.002% by mass of cadmium or
more than 0.004% by mass of lead, before placing them on the market for
the first time with the chemical symbols of metals (Hg, Cd, Pb) in which the
limit is exceeded. The characters are to be applied below the symbol.
Safety Note: The enclosed batteries must not be charged!
Hereby Active Key GmbH & Co. KG declares that the aforementioned type
of radio equipment with the product models HM803 (Medical Wireless
Mouse) and WMD (Wireless Mouse Dongle) complies with the RED
2014/53/EU directive. The full text of the EU declaration of conformity is
available at the following internet address:
http://www.activekey.de/ce-doc/CE_DOC_RED_AK-PMH2.pdf
Delivery Content:
- 2,4 GHz wireless mouse
- 2,4 GHz USB-receiver
- 2x AAA batteries
- Screwdriver
- Instructions
- Screwdriver
- Instructions
FAQ
How to pair a dongle with the device?
1) Remove the batteries from the mouse and remove the dongle
from the computer.
2) Connect the dongle with the computer.
3) Within the first 15 sec. after the dongle has been connected, place
the mouse as close as possible to the dongle (less than 1cm).
Press and hold both right button and middle button (inside the
battery compartment) and install the batteries to the mouse.
4) Keep holding the right button and middle button for 2 seconds and
then release them.
5) Test the mouse for function. If the pairing process was not
successful, please repeat the instructions from step 1).
How to determine the battery status?
1) The low battery indicator LED is located at the bottom side next to
the optical sensor window.
2) Press both mouse buttons at the same time to activate the low
battery indicator LED.
3) The LED will light in green to indicate a battery voltage above 2.2V
4) The LED will light in red to indicate a battery voltage equal or
below 2.2V. The batteries should be exchanged.
5) The mouse operation stops at a battery level of 2V.
Agency Approvals
CE, EN 60601-1-2:2015*
*No Medical Device acc.to Regulation (EU) 2017/745
FAQ
How to pair a dongle with the device?
1) Remove the batteries from the mouse and remove the dongle from
the computer.
2) Connect the dongle with the computer.
3) Within the first 15 sec. after the dongle has been connected, place
the mouse as close as possible to the dongle (less than 1cm).
Press and hold both right button and middle button (inside the
battery compartment) and install the batteries to the mouse.
4) Keep holding the right button and middle button for 2 seconds and
then release them.
5) Test the mouse for function. If the pairing process was not
successful, please repeat the instructions from step 1).
How to determine the battery status?
1) The low battery indicator LED is located at the bottom side next to
the optical sensor window.
2) Press both mouse buttons at the same time to activate the low
battery indicator LED.
3) The LED will light in green to indicate a battery voltage above 2.2V
4) The LED will light in red to indicate a battery voltage equal or
below 2.2V. The batteries should be exchanged.
5) The mouse operation stops at a battery level of 2V.
Agency Approvals
CE, EN 60601-1-2:2015*
*No Medical Device acc.to Regulation (EU) 2017/745