Dymo 9000 Manuel - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dymo 9000. Dymo 9000 6 pages.
Imprimer la pageBOX
The display shows the current selection, with six
choices of box available on the status bar.
• THICKNESS option only appears when box selection
made. Offers 3 levels of box line thickness.
JUSTIFY
Choices are Left, Centre or Right alignment of text lines
relative to each other, as shown in the display. Left
justified is default.
ORIENT.
Orientation of the label can be Horizontal (H),
Horizontal Mirrored (HM), Vertical (V) or Vertical
Mirrored (VM), In edit mode, the status bar shows
for mirrored and
for vertical text. Horizontal is the
default.
FIX. LENGTH
The label length is normally calculated automatically,
according to the length and size of the text on the label.
Choices available are (use
FIXED LENGTH TEXT (T) – press
to adjust the length shown in the box, or use the
number keys to enter the length required.
• Press
to select your choice and return to edit
mode.
in the status bar confirms that a fixed text
length is selected.
FIXED LENGTH LABEL (L) – press
to increase (up to 999mm max.) or decrease the
length in 2mm (0.1") steps, as shown in the box, or use
the number keys to enter the length required. The
Labelmaker will not allow you to make the label shorter
than the text.
• ALIGNMENT option appears when a fixed label length
is selected. Press
to choose Left , Centre or Right alignment of
the label image on the label, as shown in the display.
• Press
to fix the length for all subsequent labels
and return to edit mode.
confirms that a fixed label length is selected.
BARCODE
BARCODE
TYPE
DENSITY
EAN8
EAN13
C39
C128A
Barcodes can be either full height or mixed with text on
one or more lines, depending on the label cassette size
selected.
To create a bar code:
• Press
to display the barcode type previously
BARCODE
selected, see example EAN8 shown above.
• Press
to step through and select from the
barcode options listed in the status bar, as confirmed
in the display.
) :
then use
then use
to select ALIGNMENT, then use
in the status bar
EAN8
IIIIIII
UPCA
UPCE
C128B
C128C
• Press
density is shown in the display.
• Press
density options shown in the status bar:
• Press
barcode type selected into the workspace.
• Enter the characters which will become the barcode,
eg: 1234567. The barcode will appear as you type.
• Press
BARCODE
mode.
Note that the barcode symbol
status bar whenever the cursor is positioned over
barcode characters.
MEMORY
or
Enables you to store your favourite labels in the
memory and to recall them by pressing just a few keys.
To store a label:
• Create your label.
or
• Press
MEMORY
• Press
confirm.
You can store any number of labels in the memory,
up to a total of approximately 3000 characters. The
status bar displays the amount of memory available
– see example 97% FREE.
To recall a label:
• Press
MEMORY
• Press
flashes.
• Press
• Press
the memory, as shown in the display.
• Press
edit mode (the recalled label will appear in the
workspace) or:
• Press
ESC
options; press
and return to edit mode.
To search for a label in the memory:
• Press
MEMORY
• Press
• Press
characters of the item you are searching for.
• Press
search characters will appear in the display. Press
or
containing the search characters stored in the
memory.
5
to select DENSITY – the currently selected
to step through and select from the
IIIIIII
IIII
to return to edit mode and insert the
again followed by
will appear in the
IIIII
MEMORY
STORE
RECALL
abc
SEARCH
CLEAR
97% FREE
; STORE will flash.
to store the label;
; STORE will flash.
to step through options until RECALL
to select RECALL
or
to step through the labels stored in
to select the label required and return to
to cancel and return to the MEMORY
again to cancel MEMORY function
ESC
; STORE will flash.
until SEARCH flashes.
to select SEARCH, then enter up to 6
; the first label found containing the
to step through the remaining labels
to return to text
will appear to