Dymo ExecuLabel LM450 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dymo ExecuLabel LM450. Dymo ExecuLabel LM450 19 pages. Professional labelmaker
Imprimer la page
About Your New Labelmaker
With your new DYMO ExecuLabel
labelmaker, you can create a wide variety of high-
quality, self-adhesive labels. You can choose to
print your labels in many different sizes and styles.
The labelmaker uses DYMO D1 label cassettes in
widths of 1/4" (6 mm), 3/8" (9 mm), 1/2" (12 mm),
3/4" (19 mm), or 1" (24 mm). Label cassettes are
also available in a wide range of materials.
Visit www.dymo.com for information on obtaining
labels and accessories for your labelmaker.
Warranty Registration
Please complete the warranty registration card and
return it to the appropriate Customer Support
address within seven days of purchase. Visit
www.dymo.com/registration for details.
Getting Started
Follow the instructions in this section to print your
first label.
Connecting the Power
The labelmaker can operate on AC or battery
power. To save power, the labelmaker will
automatically turn off after two minutes of inactivity.
Inserting the Batteries
The labelmaker uses six 1.5 volt high-capacity AA
alkaline batteries.
To insert the batteries
1. Remove the battery compartment cover. See
Figure 2.
™
LM450
2. Insert the batteries following the polarity
3. Replace the battery compartment cover.
not be used for a long period of time.
Connecting the Power Adapter
An optional AC power adapter can also be used to
power the labelmaker. Connecting the power
adapter to the labelmaker disconnects the batteries
as a power source.
To connect the power adapter
1. Plug the power adapter into the power connector
2. Plug the other end of the power adapter into a
before you disconnect the power adapter from the
main power source. Otherwise, your most recent
memory settings will be lost.
Inserting the Label Cassette
Your labelmaker comes with one DYMO D1 label
cassette. Visit www.dymo.com for information
about purchasing additional label cassettes.
Figure 2
markings (+ and –).
Remove the batteries if the labelmaker will
on the top, left side of the labelmaker.
power outlet.
Make sure the labelmaker power is turned off
AUS
US
NZ
3