GABOR FSM-S Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} GABOR FSM-S. GABOR FSM-S 16 pages. Mount for small flat-panel displays

Imprimer la page

Post-Installation Adjustment

Once your display is mounted on the wall bracket, you can ﬁne-tune adjustments to the horizontal level +3° to -3°, depth from the wall

1.8 to 20 inches, tilt +10° to -15° and pivot 180°.

Horizontal Level

Loosen the three hex nuts with the included box-end wrench, and adjust

the horizontal level +3° to -3°. Use the bubble level to make sure your

display is level, then tighten the screws until secure.

+3°

-3°

Tilt Angle

Adjust the top and bottom tension screws to the desired friction and

tilt the display up or down +10° to -15°.

+10°

-15°