Active Medical Mobilo EL II Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Active Medical Mobilo EL II. Active Medical Mobilo EL II 16 pages. Braking and pushing aid

Imprimer la page

Parameters of Use

Drive your Mobilo EL II only on flat, firm ground.

Use extreme caution when driving on slopes, inclines and traverse curbs.

Overrun mode must not be used when driving on climb or descent.

For your own safety, the occupant must be ready to brake when riding on slopes.

When driving over inclines or curbs higher than 3cm, the Mobilo EL II must always be switched off and

disconnected.

To overcome obstacles (board walks, steps, etc.), it is best to use ramps.

Avoid collision with stationary obstacles.

Attachments

If, when using the braking and pushing aid, grinding, squeaking or unusual driving behaviour is noticed,

cease use immediately and contact a dealer for repair.

Pay attention to the risk of getting caught in moving parts and with embarking and decoupling.

Please note that parts that are exposed to direct sunlight can heat up and cause skin injury when

touched. Therefore, cover these parts or protect the wheelchair from direct sunlight.

At low temperatures, the framework and attachments can quickly cool down. Try the braking and

pushing aid only on the handles or use protective clothing such as gloves to handle.

Only use Besco International Germany Ltd. approved accessories and Genuine parts.

Always pay attention to a sufficient tread depth (>1mm) of your tires. Safe handling of the product can

not be guaranteed if the tread depth is too low.

The Mobilo EL II may only be used with both sides attached.