BeneCheck BK3-12M-D Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} BeneCheck BK3-12M-D. BeneCheck BK3-12M-D 16 pages. Multi-monitoring meter

Imprimer la page

Chapter 2

Setting the Meter

2.1 Installing/Replacing the Batteries

Please remove the plastic tab under the battery before using. This meter uses a CR2032

battery. Do not use or install different types of battery. It will damage the meter.

Installing Instructions:

• Slide to remove the

　battery lid.

• Slide back the

　battery lid.

Note:Dispose the batteries according to your local environmental regulations.

2.2 Set the Date and Time

Press "S" button for over three seconds. You will hear one "beep" for entering the setting

mode, then follow the instruction below to set up.

• Insert the battery with the

　positive (+) side up.

Setting order:

Year/Month/Date/Hour/Minute

• Click "M" button to advance one unit.

• Click "S" button to enter next setting.

• The meter will turn off automatically after setting.

Note:Adjust the correct time and date is important to help managing your health records.

2.3 Code the Meter

Each vial of CHOL or UA strip has a code strip to code your meter. Code your meter when

you first use it or open a new vial of strips. With the Auto Strip Recognition function, once

you code your meter, you do not have to switch the test mode with code card every time

you perform a test.

• Make sure the meter

　is off.

• Then insert the code

　strip into the test port.

• The code number will show on

　the screen.Make sure the

7142

　numbers on screen, code strip,

　and strip vial label are the

　same.

C1303190

Test Strip

2016/01

7142

153-229

mg/dL

8.5-12.7

mmol/L

• Then remove the code strip.

Operation

Storage &

Transportation

Storage &

90%

10%