Benedini TBS Mini Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Benedini TBS Mini. Benedini TBS Mini 11 pages. Digital multifunctional rc-soundunit
Également pour Benedini TBS Mini : Manuel de données techniques (11 pages), Manuel (11 pages)

Imprimer la page
Benedini TBS Mini Manuel
6. Configuration of the soundunit by the optional programming cable and a
common PC
Please see the separate manual for the configuration software called "TBS Flash".
The manual as well as the software is available free of charge at www.benedini.de.
Adapting the TBS Micro programming cable to TBS Mini
The programming cable of the TBS Micro can be used for the TBS Mini as well.
A extra connector at the programmers ribbon cable is necessary to connect the TBS Mini.
Adding the connector:
1. Remove the rear side of the connector carefully by a small screwdriver
2. Add the cable to the connectors body. Watch the right orientation!
The BROWN lead must be located at the NOSE of the connector. (see the picture below)
3. Reinstall the removed rear clamp at the body. Check if all leads of the ribbon cable are
located at the cut outs of the plug. Press body and clamp carefully together until they are
locked, indicated by a „click". This can be done f.e. in a bench vice.
Nose
BROWN lead
7. Technical datas
Supplyrange:
Internal amplifier:
Switching outputs:
Dimensions:
Weight:
You must do a rangecheck of your remote control after installation and ensure a proper
working system under all conditions !
Disclaimer
a.) www.benedini.de provides the equipment solely to be used by each purchaser in
accordance with the specific instructions supplied with each Sound Module and that the
purchaser undertakes that the Sound Module and any associated equipment e.g.
Amplifier, Speakers, etc. will be operated within the parameters contained therein.
b.) www.benedini.de accepts no liability for any damage to any Sound Module if it is
determined that the damage has been caused by either non adherence to the instructions
or due to any malfunction by any cause or reason whatsoever within the model or its
equipment and thereby outside of the control of www.benedini.de.
c.) www.benedini.de supplies each Sound Module on the strict undertaking that it will be
used in such a manner to comply with the laws of the purchaser's country of residence.
d.) www.benedini.de has no control over the final assembly, no liability shall be assumed
nor accepted for any damage resulting from any use by user of the final assembled
product, the user accepts all resulting liability.
Technical changes reserved
Müllergasse 15, 52159 Roetgen (Germany)
TBS Mini
3,5 – 12V (from receiver)
1,2W at 8 Ohm and 5V supply
Negative switching, max. 12V/0,5A each
55x25x10mm
about 6g
Benedini Modellbauelektronik
Web: www.benedini.de
www.benedini.de
Not suitable for children under 14 years
Page 10 of 11