Dymo RhinoPRO 3000 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dymo RhinoPRO 3000. Dymo RhinoPRO 3000 17 pages. Label printer
Également pour Dymo RhinoPRO 3000 : Brochure & Specs (2 pages), Fiche technique (2 pages), Démarrage rapide (2 pages), Référence rapide (2 pages)

Imprimer la page

About Your New Printer

With your new DYMO RhinoPRO

printer, you can create a wide variety of high-

quality, self-adhesive labels. You can choose to

print your labels in many different sizes and styles.

The printer uses DYMO RhinoPRO Industrial label

cassettes in widths of 3/8" (9 mm), or 1/2" (12 mm).

RhinoPRO label cassettes are also available in a

wide range of materials.

Visit www.dymo.com/industrial for information on

obtaining tapes and accessories for your printer.

Warranty Registration

Please complete the warranty registration card and

return it to the appropriate address, or you can

Getting Started

Follow the instructions in this section to print your

first label.

Power Supply

The printer is powered by standard batteries or an

AC power adapter. To save power, the printer will

automatically turn off after five minutes of inactivity.

Inserting the Batteries

The printer uses six 1.5 volt AA alkaline batteries.

To insert the batteries

1. Press the thumb latch on the bottom of the

printer to open the battery compartment door.

See Figure 2.

™

3000 label

Press thumb

latch

Figure 2

2. Insert the batteries following the polarity

markings (+ and –).

3. Close the battery compartment door.

Remove the batteries if the printer will not be

used for a long period of time.

Connecting the AC Adapter

You can also use an optional AC power adapter to

power the printer. Connecting the AC adapter

disconnects the batteries as a power source.

To connect the AC adapter

1. Plug the power adapter into the power connector

on the top of the printer.

Figure 3

2. Plug the other end of the power adapter into a

power outlet.