Dymo LabelWriter 450 Manuel de démarrage rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dymo LabelWriter 450. Dymo LabelWriter 450 14 pages. How to order and insert a roll of labels in the dymo labelwriter
Également pour Dymo LabelWriter 450 : Manuel de démarrage rapide (20 pages), Vue d'ensemble (2 pages), Manuel de configuration (11 pages), Manuel de démarrage rapide (10 pages), Manuel de l'utilisateur (19 pages), Manuel d'installation (16 pages), Manuel pratique (3 pages)

4. Loading Labels

Important!

In order for the labels to feed properly during printing, pay attention to the following when loading

labels on the spool and into the printer:

• The label spool guide must be pushed flush against the label roll, with no gap. See

Figure 6.

• The labels must be loaded with the left edge of the label inserted against the left edge of the

label feed slot. See Figure 8.

To load a label roll

Press the form-feed button to eject the labels that protected the

printer during shipment.

Open the top cover and remove any packing material inside the

label compartment.

Remove the label spool from inside the top cover and pull the spool

guide from the spindle.

Hold the spool spindle in your left hand and place the label roll on the

spindle so that the labels feed from underneath and the left edge of the label roll is firmly

against the side of the spool. See Figure 5.

Spool

spindle

guide

Figure 5