Gadget Labs WAVE/4 Manuel de l'utilisateur - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Gadget Labs WAVE/4. Gadget Labs WAVE/4 20 pages. 4 channel pc digital audio card

Imprimer la page

SyncStart:

Windows and software applications control all multichannel

sound card's channels as separate left+right channel pairs. This means that

there will be a slight delay (between 10-100 milliseconds) between stereo

pairs when playing or recording on all 4 channels on a Wave/4 card. The

SyncStart feature can be enabled to ensure that all the channels start playing

or recording together. This setting will provide *very* tight sync but it may

not be supported by all applications. Disable SyncStart when you use 2 sepa-

rate software applications to access each of the Wave/4's stereo channel

pairs.

Troubleshooting

I installed the Wave/4 card, but now, my PC system won't boot.

This happens rarely, but when it does, it is usually caused by a card that's

not seated properly in its slot. Check all of your PC's expansion bus cards

and make sure they are completely plugged into slots and their retaining

screws are tight.

I installed the Wave/4 card, and the PC starts-up fine but when I

play a wave file, I can't hear any sound.

Believe it or not, we've had a few users that called us with this problem and

didn't have the Wave/4 card audio outputs connected. Check your cables

and make sure that the card's outputs are connected correctly to your

music audio system.

The Wave/4 card seemed to install properly and the outputs ARE

connected properly, but I still can't hear any sound.

Make sure that your music/audio software application is configured to use

one of the 'Wave/4 Wave OUT...' devices. Check the prior section in this

guide, 'Setting up applications ...', for information.

The Wave/4 card seemed to install properly, but its is not show-