Dyna E30 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dyna E30. Dyna E30 17 pages. Wifi phone

Charge Battery

1. E10 has a built-in non-removable lithium cobalt battery or a built-in non-removable lithium

manganese battery. Please check if there is spare capacity in the battery the first time you use the

phone. If you can not boot the phone or the phone display low power consumption after booting,

please recharge it before using.

2. Connecting the charge base to the power supply, open the charging column protection cover at

the bottom of the phone, then insert the charge column to the charge base to start charging.

3. After that, the battery indication will start to roll while charging; when the phone finish charge,

the indication will stop rolling, please pull out the adapter to use.

Power On

Press the End key for 2 seconds, the phone start to respond and power on. You need to setup the

phone first, if you have finished setting, the phone will search for the set WLAN automatically.

Power Off

Press the End key for 2 seconds, the phone will start to respond and power off.

Active: at standby mode, press * key first, and then # key

Unlock: press the * key first, and then # key

The flashlight key is on the right side of the WIFI phone. Press the key, flashlight is turned on;

Release the key, flashlight is turned off.

This product support IEEE802.11b/g and SIP protocol, the default setting is without SIP

information, you should get the SIP name, password and domain from operator first.

For example, the information of the WLAN you're going to use is:

SSID: WIFIAP

Security type: WEP-open

Password/Text: WIFI (or Hex key: 1016A386E)

- 6 -