5G HUB QCOM tool Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 5G HUB QCOM tool. 5G HUB QCOM tool 14 pages.

2 Install LTE&GNSS Windows Driver

On Windows Operating System (OS), install the following Windows driver for LTE&GNSS modem:

5G-NB-IoT/Driver at master · 5ghub/5G-NB-IoT (github.com)

Have the Nano SIM ready:

Follow the following steps:

1- Insert a USIM card into the USIM card slot on the hardware board.

2- Connect a USB cable between the hardware board and the computer as in the following

diagram (Note: the hardware board is an example and other USB dongle or Raspberry PI HAT

can be used. You can also use different antennas if needed)

If you are using the HAT board with any of the BG96/BG95/EG95/EG91 miniPCIe module, make sure

to insert the SIM card as shown below:

QCOM Tool v1.6

Nano SIM

Top View

Bottom View