Dyna-Fog Hurricane Ultra 2796 Manuel d'utilisation et d'entretien - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Dyna-Fog Hurricane Ultra 2796. Dyna-Fog Hurricane Ultra 2796 15 pages. Ulv/mist sprayer
Imprimer la page
Do not Spray flammable liquids near open flame or other source of ignition.
Do not Use a machine that is broken or damaged in any way.
Do not Alter the machine by adding or removing parts.
Do not Restrict the motor blower inlet area.
Do not Tamper with the output nozzle.
Do not Allow the machine to operate unattended.
Do not Apply more than one gallon of formulation per 50,000 cubic feet (2.7 Liters
per 1,000 cubic meters) enclosed space. Exceeding this concentration is both
hazardous and wasteful.
1.
Periodically clean the formulation tank using a hot water/detergent solution. Fully
open the machine valve and operate the machine for 3 to 5 minutes, flushing the
solution through the valve, lines and nozzle.
2.
Examine the electrical cord for evidence of damage and replace any damaged
cord immediately.
3.
After 400-500 hours of operation, carefully remove the blower assembly and
examine the brushes and the commutator bars of the blower motor. If brushes
show excessive wear or damage, replace the blower assembly (see ITEM #24,
page 10).
4.
If it becomes necessary to disassemble the Machine Flow Valve for cleaning, be
careful not to enlarge the metering orifice or damage the taper of the valve
steam, as this will affect the calibration of the machine.
5.
Clean the Air Intake Filter after every application. If the filter gets saturated (wet
and dripping) while the machine is working, stop the machine and clean the filter.
DO NOT
MAINTENANCE
- Page 7
8